GMDSS. FCC Test 20

When can routine communications be resumed when radio silence has been imposed?

After determining that the frequency or channel appears to be no longer in use.
Routine communications can resume after the Rescue Coordination Center transmits a message on the frequency or channel being used for emergency communications stating that such traffic has concluded.
After determining that geographic distance from the distress situation will prohibit any other signal from interfering with emergency communications.
If, in the master's opinion, communications on that frequency will interfere with emergency communications.

Relays of Distress Alerts using DSC may still be done. However, it is now recommended that such relays be done:

By any of the above methods which will effectively provide Distress communications to an RCC or Coast station without further activations of other Mobile Units' DSC controllers.
Only by Inmarsat-C telex with Distress Priority.
Only by Inmarsat-A voice or telex with Distress priority.
Preferably by MF/HF voice or telex directly to the RCC.

What action should you take after sending a false distress alert on 8 MHz?

What action should you take after sending a false distress alert on MF?

Transmission of a distress alert by a station not in itself in distress should occur:

In some cases, all of the preceding situations may justify a Distress Alert relay.
When the responsible person at the Coast Station determines further help is necessary.
When the Master or responsible person on the mobile unit not in distress so decides.
When the mobile unit actually in distress is not itself in a position to transmit the distress alert.

What action should you take after sending a false distress alert on VHF?

What is the fundamental purpose for imposing radio silence?

To ensure that interference to proprietary communications is minimized.
To ensure that a distressed vessel will have a 'window' twice each hour for transmitting routine messages.
To ensure that only voice communications can be effected on the distress frequency or channel.
To ensure that interference on a particular frequency or channel for communications concerning emergency traffic is minimized.

What action should you take after sending a false distress alert on 12577.0 kHz?

Make an 'ALL SHIPS' call on the associated 12 MHz J3E frequency canceling the alert.
Send a message to the nearest RCC via Inmarsat canceling the alert.
No action is necessary.
Make an 'ALL SHIPS' call on all 5 H.F. telex frequencies canceling the alert.

What action should you take after sending a false distress alert on MF?

What action should you take after sending a false distress alert on Inmarsat-C?

Select 'Transmit' menu and send a cancel message via the CES used for the distress alert.
None of the above.
Both of the above.
Press the 'Distress Hot Keys? then press the 'cancel' key.

Review Answers